Kamis, 30 April 2015

Hino





Data and spesification
General

Model
EH 700
Type
Diesel 4 cycle, vertical 6 cylinder inline overhead valve, water cooled direct injection type
Bore and stroke
110 × 113 mm
Piston displacement
6.443 litres
Compression ratio
17,9 : 1
Firing order
1-4-2-6-3-5
Compression pressure
32 ±3 kg/cm² at 290 ±20 rpm
Maximum revolution
3200 rpm
Idling revolution
500 - 550 rpm
weight
496 kg
Cylinder head
Type
Singel piece casting
Material
cast iron


Valve mechanism
Valve seat angel      inlet
30°
                                Exhaust
45°
Valve face angel     inlet
30°
                                Exhaust
45°
Valve material        inlet
heat resistance steel
                               Exhaust
Special heat resistance steel
Valve timing (flywheel travel) :
Inlet opens
16° before T.D.C
Exhaust opens
40° after B.D.C
Inlet closes
51° before B.D.C
Exhaust closes
13 ° after T.D.C
Valve clearence (when cold) :
Inlet
0,30 mm
Exhaust
0,40 mm
Tappet
Special cast iron
Push rod
Hollow carbon steel
Cylinder block, Cylinder liner, and Camshaft
Cylinder block
Monoblock, six cylinder, cast iron
Cylinder liner
Dry type, replaceable, spessial chrome alloy
Camshaft
case, hardened die-forged carbon steel in material
Camshaft bearing number and material
7, withe metal with carbon steel back metal
Connecting rod and piston
Connecting rod
6, carbon steel
Small and bearing, material
Bronze
Large and bearing material
Thin, kelmet with lead alloy
Piston
Heat, resistance aluminum alloy
Piston ring : compression
Three, with chromeplated
                    Oil ring
One, chromeplated with coil expander


Tidak ada komentar:

Posting Komentar